SUBPART J [PSES for secondary fiber non-deink facilities where molded products from wastepaper are produced without deinking]

Maximum for any 1 day

Pollutant or pollutant property

Milligrams/liter (mg/l)

Kg/kkg (or pounds per 1,000 lb) of product

Pentachlorophenol

(0.032)(21.1)y

0.0028 Trichlorophenol

(0.010)(21.1)y

0.00088 y = Wastewater discharged in kgal per ton of product.

a The following equivalent mass limitations are provided as guidance in cases when POTWs find it necessary to impose mass effluent limitations

not

$430.107 Pretreatment standards for achieve the following pretreatment new sources (PSNS).

standards for new sources (PSNS) if it uses

chlorophenolic-containing Except as provided in 40 CFR 403.7,

biocides. Permittees

using any new source subject to this subpart

chlorophenolic-containing biocides that introduces pollutants into a pub

must certify to the permit-issuing aulicly owned treatment works must:

thority that they are not using these Comply with 40 CFR part 403; and

biocides:

SUBPART J
(PSNS for secondary fiber non-deink facilities where paperboard from wastepaper is produced]

Pentachlorophenol

(0.072)(3.2)/y

0.00096 Trichlorophenol

(0.023)(3.2)/y

0.00030 y = wastewater discharged in kgal per ton of product.

a The following equivalent mass limitations are provided as guidance in cases when POTWs find it necessary to impose mass effluent limitations.

SUBPART J (PSNS for secondary fiber non-deink facilities where builders' paper and roofing felt from wastepaper are produced]

Maximum for any 1 day

Pollutant or pollutant property

Milligrams/liter (mg/l)

Kg/kkg (or pounds per 1,000 lb) of product a

Pentachlorophenol

(0.171)(2.7)/y

0.0019 Trichlorophenol

(0.053)(2.7)/y

0.00060 y = wastewater discharged in kgal per ton of product.

The following equivalent mass limitations are provided as guidance in cases when POTWs find it necessary to impose mass effluent limitations.

SUBPART J
(PSNS for secondary fiber non-deink facilities where tissue from wastepaper is produced without deinking)

Maximum for any 1 day

Pollutant or pollutant property

Milligrams/liter (mg/l)

Kg/kkg (or pounds per 1,000 lb) of producia

Pentachlorophenol
Trichlorophenol

(0.049)(16.3)/y
(0.015)(16.3)/y

SUBPART 1-Continued
(PSNS for secondary fiber non-deink facilities where tissue from wastepaper is produced without deinking)

Pollutant or pollutant property

Maximum for any 1 day

kgkkg for Milligrams/liter (mg1)

pounds per 1,000 b) of product

y = wastewater discharged in kgal per ton of product.

a The following equivalent mass limitations are provided as guidance in cases when POTWs find it necessary to impose mass effluent limitations.

SUBPART J (PSNS for secondary fiber non-deink facilities where molded products from wastepaper are produced without deinking)

Maximum for any 1 day
Pollutant or pollutant property

Kakkg (or
Milligrams/liter (mg/l)

pounds per 1,000 lb) of product

Pentachlorophenol

(0.118)(5.7)/y

0.0028 Trichlorophenol

(0.037)(5.7)/y

0.00088 y = wastewater discharged in kgal per ton of product.

a The following equivalent mass limitations are provided as guidance in cases when POTWs find it necessary to impose mass effluent limitations.

Subpart K-Fine and Lightweight product) are used in the production of

Papers from Purchased Pulp fine papers.
Subcategory

(c) Wood fiber furnish subdivision

mills are those mills where cotton fi8 430.110 Applicability; description of bers are not used in the production of the fine and lightweight papers

fine papers. from purchased pulp subcategory.

$430.112 Effluent limitations repThe provisions of this subpart are ap

resenting the degree of effluent replicable to discharges resulting from duction attainable by the applica. the production of: fine paper at non- tion of the best practicable control integrated mills; and lightweight paper technology currently available at nonintegrated mills.

(BPT).

Except as provided in 40 CFR 125.30 § 430.111 Specialized definitions.

through 125.32, any existing point For the purpose of this subpart:

source subject to this subpart must (a) Except as provided in paragraphs achieve the following effluent limita(b) and (c) of this section, the general tions representing the degree of effludefinitions, abbreviations, and methods ent reduction attainable by the appliof analysis set forth in 40 CFR part 401 cation of the best practicable control and $ 430.01 of this part shall apply to technology currently available (BPT), this subpart.

except that non-continuous dischargers (b) Cotton fiber furnish subdivision shall not be subject to the maximum mills are those mills where significant day and average of 30 consecutive days quantities of cotton fibers (equal to or limitations but shall be subject to angreater than 4 percent of the total nual average effluent limitations:

SUBPART K [BPT effluent limitations for non-integrated mills where fine paper is produced from purchased pulp—wood fiber furnish

subdivision]

SUBPART K [BPT effluent limitations for non-integrated mills where fine paper is produced from purchased pulp cotton fiber furnish

subdivision)

SUBPART K
(BPT effluent limitations for non-integrated mills where lightweight papers are produced from purchased pulp]

SUBPART K (BPT effluent limitations for non-integrated mills where lightweight papers are produced from purchased pulp electrical grade

papers subdivision

Pollutant or pollutant property

Kg/kkg (or pounds per 1,000 lb) of

product Continuous dischargers

Non-continAverage of

SUBPART K-Continued (BPT effluent limitations for non-integrated mills where lightweight papers are produced from purchased pulp electrical grade

papers subdivision

SUBPART K (BAT effluent limitations for non-integrated mills where fine paper is produced from purchased pulp—wood fiber furnish

subdivision)

SUBPART K (BAT effluent limitations for non-integrated mills where fine paper is produced from purchased puip-cotton fiber furnish

subdivision]

SUBPART K
[BAT effluent limitations for non-integrated mills where lightweight papers are produced from purchased pulp)

SUBPART K (BAT effluent limitations for non-integrated mills where lightweight papers are produced from purchased pulp-electrical grade

papers subdivision]