صور الصفحة
PDF
النشر الإلكتروني

SUBPART E

PSES (TCF)

Pollutant or pollutant parameter

Maximum for any 1

day

Monthly average

AOX

ML a

(6) & “ML" means less than the minimum level specified in § 430.01(1) for the particular pollutant.

o This regulation does not specity this type of limitation for this pollutant; however, pretreatment control authorities may do so as appropriate

(b) The following pretreatment compounds as biocides. In cases when standards apply to each indirect dis- POTWs find it necessary to impose charger, in accordance with the pre- mass effluent limitations, equivalent vious subcategorization scheme, unless mass limitations are provided as guidit certifies to the pretreatment control

ance: authority that it is not using these

SUBPART E

[blocks in formation]

(c) An indirect discharger must dem- $ 430.57 Pretreatment standards for onstrate compliance with the new sources (PSNS). pretreatment standards in paragraphs

Except as provided in 40 CFR 403.7, (aX2) or (a)(3) of this section, as appli

any new source subject to this subpart cable, by monitoring for all pollutants that introduces pollutants into a pubat the point where the wastewater con- licly owned treatment works must: taining those pollutants leaves the comply with 40 CFR part 403; and bleach plant.

achieve the following pretreatment

standards for new sources (PSNS). (63 FR 18635, Apr. 15, 1998; 63 FR 42239 Aug. 7, 1998]

(a) (1) The following pretreatment standards apply to each indirect discharger in the calcium-, magnesium-, or sodium-based sulfite

pulp segment that is a new source:

SUBPART E
(Production of Calcium-, Magnesium-, or Sodium-Based Sulfite Pulps)

PSNS

Pollutant or pollutant property

Maximum for any 1

day

Monthly average

kg/kkg (or pounds per 1,000 lb) of

product

AOX

ML

(6) a“ ML" means less than the minimum level specified in $430.01(1) for the particular pollutant. This regulation does not specity this type of limitation for this pollutant; however, pretreatment control authorities may do so as appropriate.

(2)(i) The following standards apply to each indirect discharger in the ammonium-based sulfite pulp segment that is a new source:

SUBPART E–PRODUCTION OF AMMONIUM-BASED SULFITE PULPS

[graphic]
[ocr errors]

PSNS
Pollutant or pollutant property

Maximum for any 1 Monthly
day

average TCDD a

<MLD TCDF a

<MLD Trichlorosyringola

<MLD 3,4,5-trichlorocatechola

<MLD 3,4,6-trichlorocatechol a

<MLD 3,4,5-trichloroguaiacola

<MLD 3,4,6-trichloroguaiacola

<MLD 4,5,6-trichloroguaiacola

<MLD 2,4,5-trichlorophenol a

<MLD 2,4,6-trichlorophenola

<ML Tetrachlorocatechola

<MLD Tetrachloroguaiacola

<MLD 2,3,4,6-tetrachlorophenola

<MLD Pentachlorophenola

<MLD

(5) a These limitations do not apply with respect to fiber lines operated by any indirect discharger that discloses to the pretreatment control authority, at the time it submits the report required under 40 CFR 403.12 (b), (d), or (e), that it uses a TCF bleaching process at that fiber line.

b"<ML" means less than the minimum level specified in $ 430.01(1) for the particular pollutant. © This regulation does not specify this type of limitation for this pollutant; however, pretreatment control authorities may do so as appropriate

to

(ii) The following pretreatment discharger discloses

the standards apply with respect to each pretreatment control authority in a renew source fiber line operated by an in- port submitted under 40 CFR 403.12(b). direct discharger producing ammo- (d), or (e) that it uses exclusively TCF nium-based sulfite pulps if the indirect bleaching processes at that fiber line:

SUBPART E–PRODUCTION OF AMMONIUM-BASED SULFITE PULPS

PSNS (TCF)

Pollutant or pollutant parameter

Maximum for any 1

day

Monthly average

AOX

<ML a

(6) a"<ML" means less than the minimum level specified in $430.01(i) for the particular pollutant.

bThis regulation does not specify this type of limitation for this pollutant; however, pretreatment control authorities may do so as appropriate.

(3)(i) The following pretreatment standards apply to each indirect discharger in the specialty grade sulfite pulp segment that is a new source:

[graphic][subsumed][subsumed][subsumed][subsumed][merged small][subsumed][merged small]

SUBPART E-PRODUCTION OF SPECIALTY GRADE SULFITE PULPS—Continued

PSNS
Pollutant or pollutant property

Maximum for any 1 Monthly
day

average Pentachlorophenol

<ML

(C) * These limitations do not apply with respect to fiber lines operated by any indirect discharger that discloses to the pretreatment control authority, at the time it submits the report required under 40 CFR 403.12 (b), (d), or (e), that it uses a TCF bleaching process at that fiber line. b* ML" means less than the minimum level specified in 6430.01(1) for the particular pollutant.

This regulation does not specity this type of limitation for this pollutant; however, pretreatment control authorities may do so as appropriate

(ii)

The following pretreatment charger discloses to the pretreatment standards apply with respect to each control authority in a report submitted new source fiber line operated by an in- under 40 CFR 403.12(b), (d), or (e) that it direct discharger producing specialty uses exclusively TCF bleaching procgrade sulfite pulps if the indirect dis- esses at that fiber line:

SUBPART E–PRODUCTION OF SPECIALTY GRADE SULFITE PULPS

PSNS (TCF)

Pollutant or pollutant parameter

Maximum for any 1

day

Monthly average

AOX

<ML a

() ** <ML" means less than the minimum level specified in 8430.01(1) for the particular pollutant.

bThis regulation does not specity this type of limitation for this pollutant; however, pretreatment control authorities may do so as appropriate

as

(b) The following pretreatment is not using these compounds standards shall apply to each new biocides. In cases when POTWs find it source indirect dischargers unless the necessary to impose mass effluent indirect discharger certifies to the standards, equivalent mass standards pretreatment control authority that it are provided as guidance:

SUBPART E

[blocks in formation]

Subpart F-Semi-Chemical 8 430.62 Effluent limitations repSubcategory

resenting the degree of effluent re

duction attainable by the applica§ 430.60 Applicability; description of tion of the best practicable control the semi-chemical subcategory.

technology currently available

(BPT). The provisions of this subpart are applicable to discharges resulting from Except as provided in 40 CFR 125.30 the integrated production of pulp and through 125.32, any existing point paper at semi-chemical mills.

source subject to this subpart must

achieve the following effluent limita$ 430.61 Specialized definitions.

tions representing the degree of effluFor the purpose of this subpart, the ent reduction attainable by the appligeneral definitions, abbreviations, and cation of the best practicable control methods of analysis set forth in 40 CFR

technology currently available (BPT): part 401 and $430.01 of this part shall apply to this subpart.

SUBPART F
(BPT effluent limitations for ammonia base mills)

[blocks in formation]

$ 430.64 Effluent limitations rep- application of the best available tech

resenting the degree of effluent re- nology economically achievable (BAT). duction attainable by the applica. Non-continuous dischargers shall not tion of the best available tech

be subject to the maximum day mass nology economically achievable

limitations in kg/kkg (lb/1,000 lb), but (BAT).

shall be subject to concentration limiExcept as provided in 40 CFR 125.30 tations. Concentration limitations are through 125.32, any existing point only applicable to non-continuous dissource subject to this subpart where chargers. Permittees not using chlorophenolic-containing biocides are chlorophenolic-containing biocides used must achieve the following efflu- must certify to the permit-issuing auent limitations representing the degree thority that they are not using these of effluent reduction attainable by the biocides:

SUBPART F

Pollutant or pollutant property

BAT effluent limitations

Maximum for any 1 day
kg/kkg (or
pounds per
1,000 lb) of

Milligrams/liter product

Pentachlorophenol
Trichlorophenol
y = wastewater discharged in kgal per ton of product.

0.0012 (0.029) (10.3)/y
0.00043 (0.010)(10.3)/y

$ 430.65 New source performance itations (mg/l) shall apply, where prostandards (NSPS).

vided. Concentration limitations will Any new source subject to this sub

only apply to non-continuous dispart must achieve the following new

chargers. Only facilities where source performance standards (NSPS), chlorophenolic-containing biocides are except that non-continuous dischargers used shall be subject to shall not be subject to the maximum pentachlorophenol and trichlorophenol day and average of 30 consecutive days limitations. Permittees not using effluent limitations for BOD5 and TSS, chlorophenolic-containing biocides but shall be subject to annual average must certify to the permit-issuing aueffluent limitations. Also, for non-con- thority that they are not using these tinuous dischargers, concentration lim- biocides:

SUBPART F

(NSPS)

[blocks in formation]
« السابقةمتابعة »